archive-gr.com » GR » C » CMENGINEERING.GR

Total: 228

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • C&M Engineering S.A.
    the 800 MWe combined cycle power plant of P P C at Megalopolis in Peloponnese and to cover the needs of the urban commercial sector and of the small industries at various regions in Peloponnese The project consists of the following main facilities and components 158 km of 30 24 inch diameter high pressure gas pipeline Five Line Valve Stations Two Terminal Scraper Stations SCADA and Telecommunication System integrated with

    Original URL path: http://cmengineering.gr/Projects%20Html/Energy/4_PPC%20Megalopoli/4_PPC%20Megalopoli.html (2016-02-13)
    Open archived version from archive


  • C&M Engineering S.A.
    wet type natural draft cooling tower The UNIT shall be complete with all necessary systems such as Fuel handling feeding and preparation system pre crushing drying and pulverizing Steam generator with auxiliary systems Flue gas heat recovery systems for maximizing Unit s efficiency Steam turbine generator set with auxiliary systems Condensing system and condensate feedwater treatment preheating and conditioning systems Cooling tower and cooling water systems open and closed cooling water systems Flue gas cleaning systems as mentioned in previous paragraph Clean gas system for the discharge to the atmosphere of the flue gases via the cooling tower without by pass stack By products handling and transportation systems wet and fly ash gypsum and sludge The unit shall consist of the following buildings structures facilities site improvements and area works to be designed and constructed 1 Crusher House 2 Transformers Yard 3 Turbine House 4 Electrical Building 5 Boiler House 6 Electrostatic Precipitators 7 Fans 8 Flue Gas Heat Recovery System 9 Absorber and Absorber Building 10 Recirculation Pumps Building 11 FGD Dewatering and Limestone Preparation Building 12 FGD Electrical Building 13 Limestone Unloading Building 14 Limestone Storage Silo 15 Void 16 Process Water Tank 17 Limestone Slurry Tank 18 Slurry Emergency Storage Tank 19 Gypsum Storage Silo 20 Fly Ash and Wet Ash Silos 21 Electrical Building for Ash Handling 22 Waste Water Treatment Plant S1 23A Diesel Oil Unloading and Pumping Station 23B Diesel Oil Storage Tank 24 Auxiliary Steam Generating Plant and Diesel Oil Tank 25 Daily Diesel Oil Tank 26 Cooling Tower 27 Cooling Water Pipes 28 Raw Water Storage Tank and Pumping Station 29 Reverse Osmosis Building 30 Desalinated Water Storage Tanks 31 Demi Water Plant and Chemical Laboratories 32 Demi Water Storage Tanks 33 Waste Water Treatment Plant S2 34 Sanitary Waste Water Treatment

    Original URL path: http://cmengineering.gr/Projects%20Html/Energy/Ptolemais/Ptolemais.html (2016-02-13)
    Open archived version from archive

  • C&M Engineering S.A.
    in Operation a Combined Cycle Power Plant Unit No 5 Natural Gas Fired of Net Power 811 MW of Public Power Corporation PPC S A The Project refers to a natural gas fired Combined Cycle Power Plant that comprises two gas turbines two Heat Recovery Steam Generators HRSGs and one steam turbine 2 2 1 configuration one by pass stack per gas turbine with a water cooled condenser and a mechanical draft wet cooling tower for cooling the water The unit shall consist of the following buildings structures facilities site improvements and area works 1 Demolitions and Preparation Works 2 Gas Turbines Building 3 Steam Turbine Building 4 By pass Stacks 5 HRSGs Structures Stacks 6 Transformers Yard 7 Control Electrical Building 8 Black start Diesel Generators Building 9 Auxiliary Boiler 10 Hydrogen CO2 Bottles Building 11 Cooling Tower 12 Cooling Water Pipes 13 GRS Building 14 Fuel Gas Pipe Trench 15 Waste Water Collection Pits 16 Water Treatment Plant 17 Auxiliary Electrical Building of Cooling Tower 18 Fire Fighting Pumping Station 19 Sludge Cake Transfer Conveyors Provided Services Detail design engineering for Buildings mechanical and electrical works Structural works for auxiliary cable pipe racks cable pipe galleries tanks auxiliary

    Original URL path: http://cmengineering.gr/Projects%20Html/Energy/Megalopoli/Megalopoli.html (2016-02-13)
    Open archived version from archive

  • C&M Engineering S.A.
    single shaft arrangement heat recovery steam generator air cooled condensers main feed water pump station main and auxiliary electrical buildings including MV and LV switchboards and UPS with batteries step up and step down power transformers emergency diesel generator control room administration building warehouses and workshop main and auxiliary pipe rack gas N2 H2 storage facilities greases and oils storage facilities facilities for storage treatment and distribution of industrial demineralized

    Original URL path: http://cmengineering.gr/Projects%20Html/Energy/Power%20Plant%20Thiva/Power%20Plant%20Thiva.html (2016-02-13)
    Open archived version from archive

  • C&M Engineering S.A.
    sets for the production of electrical power 3x50 150 MWe consuming natural gas of 15 000 Nm3 h total flow or alternatively diesel oil The project includes also utility systems and installations such as step up and step down power transformers MV and LV switchboards batteries systems UPS control room waste water treatment plant natural gas M R station and network diesel oil storage and distribution system facilities for storage

    Original URL path: http://cmengineering.gr/Projects%20Html/Energy/15%20MW%20Thiva/15%20MW%20Thiva.html (2016-02-13)
    Open archived version from archive

  • C&M Engineering S.A.
    LNG The Power Station comprises 2 x 6 72 MWe gas engine generator sets complete with their auxiliary equipment heat recovery system fuel gas metering reducing station compressed air system with 34 Nm3 h 30 barg Air Compressors for G E sets and 95 Nm3 h 8 barg Service Air Compressors 22 m3 Lube Oil Storage Tank and forwarding system 47 m3 s forced air radiator coolers hot water system service make up pumping system 2 x 110 m 3 h HT Cooling Water Pumps 2 x 90 m3 h LT Cooling Water Pumps and 2 x 384 m3 h SCV water circulation pumps station auxiliary transformers MV LV switchboards DC system DCS control system communication and CCTV systems electrical and control interlocks with the existing substation and control system of LNG Terminal and the National Electrical Transmission Grid steel structures 2 x 30m steel stacks 585 m2 steel structure buildings concrete structures HVAC and fire fighting systems lighting small power grounding and lightning systems drainage system earthworks and various civil works Provided Services EPC contractor s detail design engineering review Review and control of the efficiency of all programs procedures and construction methods issued by the contractor Technical support

    Original URL path: http://cmengineering.gr/Projects%20Html/Energy/73_LNG%20Terminal/73_LNG%20Terminal.html (2016-02-13)
    Open archived version from archive

  • C&M Engineering S.A.
    Procurement and Construction of a new Power Plant producing 115 4 MWe net electrical capacity located at Catavia area in Rhodes Island Greece The Power Plant comprises 7 four stroke diesel engines generating electric power 16 49 kWe net power output each complete with their auxiliary equipment onshore and offshore facilities Primary fuel is low sulphur content HFO The engines are capable to operate with diesel and natural gas future The Plant is consisting of offshore fuel unloading facilities sea water handling facilities fuel and water pipelines Machine hall Electrical and Control building Administration building 150kV HV Substation MV LV Substation HFO DFO and Lubrication oil tank farms complete with treatment and forwarding facilities WTP WWTP DeNOx and Urea facilities DeSOx provision future Exhaust gas boilers Auxiliary steam generator Compressed air system Service water system Heating HVAC and Ventilation facilities Firefighting systems Piping MV LV DC electrical systems for the whole plant Diesel generator DCS instrumentation various concrete and steel structures roads and landscaping Provided Services Detailed Design Engineering for Main Power Plant and Onshore Facilities including all main and secondary mechanical systems and mechanical installations for all buildings all main and secondary electrical systems and electrical installations for all

    Original URL path: http://cmengineering.gr/Projects%20Html/Energy/PPC%20Rhodos/PPC_Rhodos.html (2016-02-13)
    Open archived version from archive

  • C&M Engineering S.A.
    thermal cracking unit flexicoker with a capacity of 20 000 bbl day the only one of its kind in Greece and just the second in Europe using Exxon know how and technology for converting crude residue into coke and clean gaseous fuel for the energy needs of the refinery A hydrogen production plant with a capacity of 120 000 Nm3 hour Auxiliary units air steam sulfur recovery amine water cooling and others The new refinery is characterized by its increased yield of middle distillates diesel jet fuel and modern and environmentally friendly standards which are in short supply in Europe and the Mediterranean region Respectively there is no output of low value high sulfur fuel oil the demand of which is steadily decreasing in the European market Also the refinery s operating conditions in terms of both safety as well as environmental impact were significantly upgraded Provided Services C M provided the following services A To HELLENIC PETROLEUM S A Technical Consultancy Services for Electrical Mechanical Works Design Review drawings specifications calculations Review control and administration of purchase orders for Electrical Mechanical Equipment Participation in Technical Meetings Technical Consultancy Services for Contracts Administration Monitoring control of terms conditions of contracts

    Original URL path: http://cmengineering.gr/Projects%20Html/Energy/Elefsis%20Refinery/Elefsis_Refinery.html (2016-02-13)
    Open archived version from archive



  •